How To Set Up Wii Sensor Bar

Download Article

Download Article

This wikiHow teaches yous how to claw up your Wii panel to your TV, besides equally how to go through the initial setup steps once your Wii is connected. The procedure for setting up a Wii U is a bit dissimilar, so make sure you're using a Wii or a Wii mini and not the newer Wii U.

1. 1

   Place the Wii nearly your TV. Brand sure that the Wii is placed close enough for the cables to reach the Telly and the power outlet.^[1]

   • If you are using the vertical stand, first make sure that the stand is assembled by taking the vertical stand and the round slice of plastic and sliding them together until they click.

2. 2

   Connect your Wii to a power source. Plug the ability cable that came with your Wii into an electrical outlet, then plug the other end into the port on the far-left side of the back of the Wii.

   Advertisement

3. iii

   Adhere the sensor bar to the Wii. Plug the sparse, black-and-gray sensor bar's cable into the cerise port that's on the back of the Wii console, and so place the sensor bar below and in front of your TV. Remove the covers over the sticky pads on the sensor'south lesser to secure it in identify.

   • You can as well place the sensor bar on top of your Boob tube.

4. iv

   Connect the Wii to the TV. Most Wii units come with cherry, white, and yellowish A/V cables; plug the non-colored end of the cable into the flat, broad port on the back of the Wii unit, so attach the red, white, and xanthous cables to the red, white, and yellowish ports in the "Video In" section that's behind or on the side of your TV.

   • The Wii requires Wii-specific cables in order to connect to your TV; standard A/V cables will not work.
   • If you're trying to connect your Wii'south A/Five cables to a estimator monitor, you'll have to purchase an adapter for your monitor.

5. 5

   Insert batteries into the Wii remote. Remove the back panel from the Wiimote and put ii AA batteries in. These are included with the console if y'all bought it new. Utilize the printed + and - guides to ensure that the batteries are inserted correctly.

   • If your Wii remote has a safety jacket, you lot will need to remove it before yous can admission the bombardment cover.

6. half dozen

   Exam the Wii remote. Press A on the Wii remote to verify that the batteries are working. If you lot see the lights at the bottom of the remote briefly plough on or flash and and then stay on, your remote is working.

   • If the lights don't come on at all, try inserting new batteries.

7. 7

   Secure the wriststraps to the Wiimotes. Wriststraps are very important when using the Wii, especially when playing games with lots of movement. The Wii remote is secured at the bottom of the Wiimote by looping the wriststrap through the claw. You can cinch the wriststrap around your wrist while you play.

8. 8

   Plow on your Goggle box. Press your TV's ability button to turn on the set.

9. 9

   Switch to your Wii'southward input. Press your TV'southward (or Television receiver remote's) Input or Video push until you run into the correct number announced. Your Wii will be plugged into the A/V input, which is usually input number 1, 2, or iii.

   • You lot tin can double-check your Wii's input number on your Goggle box past looking for a number nearly the yellow, white, and scarlet plugs on the dorsum or side of your Television set.

10. 10

    Turn on the Wii. Press the Power button on the front of the Wii. After a few seconds, you lot should run across the Wii setup screen appear on your TV.

    • If you don't meet or hear anything, ensure that your TV is set to the correct input, and that your A/5 cable is connected correctly.
    • Cycling through the available inputs will eventually crusade the Wii'southward setup screen to brandish.

11. 11

    Synchronize your Wii remote with your console. In one case your remote is synchronized, y'all'll come across one constant ruddy light at the bottom of the remote, meaning that you tin proceed with setting up your Wii. To sync your remote:^[2]

    • Open the SD card slot on the front of your Wii console.
    • Remove the battery cover on the Wii remote.
    • Press the Sync push beneath the bombardment compartment.
    • Wait for the lights at the lesser of the Wii remote to beginning blinking.
    • Printing the red Sync button in the Wii'due south SD carte slot.

Advertizement

1. i

   Press the A push. It's at the top of the remote.

   • If your Wii has been set up before, your Wii may open to the dwelling screen. If then, skip to the next role.

2. ii

   Select a linguistic communication and press A . This will select the language for your Wii's menus.

3. 3

   Select Go on and printing A . It's in the bottom-right corner of the screen.

4. iv

   Select a sensor bar position. Select either In a higher place TV or Beneath Boob tube and press A, then select Proceed.

5. v

   Select a date. Select the upward or down arrows higher up or below the month, day, and yr values, then press A to alter them. Select Continue when you lot're washed.

6. vi

   Select a time. You'll do this the same way that you changed the date. Select Go along when you're done.

   • Keep in mind that the clock here is in military time, meaning that you add 12 to the time in PM from apex through midnight (e.g., 12:00 PM would be "1200", simply 3:00 PM would be "1500").

7. 7

   Select a widescreen setting. Select iv:3 for a normal TV or 16:9 for a widescreen Television, then select Continue.

8. 8

   Enter a nickname for your console. Type in a name using the on-screen keyboard, then select Continue.

9. 9

   Select a country. Select the country you're currently in and printing A, and so select Proceed.

10. ten

    Select No and press A . This volition take you past the parental controls warning.

11. eleven

    Press A . This will acknowledge that you have read the Wii's fire-in reduction filter policy. Doing so will take you to the Wii dwelling house screen, signifying that your setup is consummate.

    • Depending on your Wii, a video displaying how to use your Wii may begin playing.

Advertizement

1. ane

   Select Wii and press A . This option is in the bottom-left corner of the screen. Doing and then prompts a pop-up carte du jour.

2. 2

   Select Wii Options and press A . Information technology's an choice in the pop-up menu. This will open the Wii Options page.

3. 3

   Scroll correct, so select Sensor Bar and printing A . Scrolling right takes yous to the second page of the Wii Options screen, and the Sensor Bar option opens your Wii'due south sensor bar settings.

4. 4

   Select Position and press A . Doing and so opens the Position menu.

   • Skip this step if you don't desire to reset the position you prepare during the Wii setup.

5. 5

   Select a position. Select either Above Television receiver or Beneath Television set and printing A.

6. six

   Select Confirm and printing A . It's at the lesser of the screen. This will fine-tune your sensor based on its position.

7. 7

   Adjust your sensor bar's sensitivity. Select Sensitivity and printing A, then press + or - on your remote to increment or decrease your remote'southward sensitivity on-screen.

8. 8

   Press A . This will confirm your decision and return you to the Sensor Bar page.

Advertisement

1. 1

   Leave the Sensor Bar page. Select Dorsum and printing A to render to page two of the Options folio.

   • If you take an Ethernet USB adapter that you bought from Nintendo, y'all tin can plug it into the back of your console then plug an Ethernet cablevision from your router into the adapter.

2. 2

   Select Cyberspace and printing A . This will open the Cyberspace settings.

3. 3

   Select Connection Settings and printing A . This will display a list of three connections.

   • If the Wii has never been connected to the internet, all of the settings will say "None" side by side to the Connection number.

4. 4

   Select an unused connectedness and press A .

5. 5

   Select Wireless and press A . Doing so will take y'all to the wireless network page.

   • If you're using Ethernet, select Wired so select OK to connect to the Net.

6. six

   Select Search for an Access Point and press A . This will bring upwardly a list of the electric current available networks.

7. vii

   Select a network and press A . This will bring up the connection'south page.

   • If the connection is public, selecting the network will prompt your Wii to connect to information technology automatically.

8. 8

   Enter your network'southward password. If your network is password-protected, enter the countersign and press A.

9. 9

   Update your Wii. Once yous connect to either your wired or wireless network, you volition be prompted to update your arrangement. These updates can improve system functionality, and are required if you are playing online.

   • Exercise not update your system if it is modded, or it will be bricked and you will lose access to your Homebrew aqueduct.

10. 10

    Add games and channels. After updating your system, y'all will be connected to the internet every fourth dimension the Wii is turned on. You can then add together games and channels from the Wii shop. Games will cost money to purchase, merely almost channels tin exist downloaded for free (some crave a separate subscription to use).

    • Yous tin access the store from the Wii Channels screen.

Advertisement

1. 1

   Insert the game you want to play. If at that place'south goose egg in your disc slot, you can insert the game into the disc bulldoze to load information technology. Inserting the disc will open the game's channel, assuasive yous to first it by pressing the button on your screen.

   • Make sure that y'all insert the disc the correct direction, with the characterization facing up.
   • Yous can besides download games from the Wii store and they will bear witness up as channels in your Channel menu.

2. two

   Use the Wiimote to play. Depending on the game, you lot may be asked to swing your controller around to play the game. Make sure you have enough of room to motion, and that yous won't bump into anyone or anything.

3. 3

   Play a GameCube game . If you want to play a GameCube game in an RVL-001 Wii, you will need to use a GameCube controller, and plug it into i of the ports on the summit (vertical) or left side (horizontal) of the Wii. Y'all will demand to open a flap to access the ports.

   • Yous'll insert the GameCube game similar y'all would a regular Wii game. Although the discs are smaller, they can exist inserted into any part of the disc loader.

Ad

Add New Question

• Question

  What do I practice if there is no sensor, and the cursor doesn't piece of work?

  

  If there is no sensor bar, the cursor will not work. You need to fix your sensor bar.

• Question

  How exercise I connect a Wii Board to my Wii?

  

  The Wii rest lath connects but like a Wii remote. Insert its batteries, press the power push button on the board, and it should connect every bit Wii remote 4. The first time you connect information technology, you may need to hold the minor cherry-red reset buttons (one in the board'due south battery compartment, the other behind the Wii's SD card slot cover) simultaneously.

• Question

  How do I download the Wii Mii channel to play games?

  

  The Mii aqueduct comes preloaded on every Wii. It is not used to play games; information technology is just where yous create characters, "miis" that tin exist used in many games.

• Question

  I don't see a yellow plug-in for the Wii cables on the dorsum of my TV. Whatever suggestions?

  

  The bank of plug-ins may exist hidden behind a trap door on the back of your TV.

• Question

  How exercise I search for a game in the Wii Shop?

  

  Abbey M.

  Community Reply

  Go to the Wii Shop Channel, so you select Commencement Shopping, then Virtual Console for older games or WiiWare for newer, more than advanced gameplay experiences. Browse with a filter of your choice.

• Question

  When I apply names and faces to the people in the games, does that stay on the disk or in the Wii unit of measurement?

  

  Information technology depends on what people you are using. If "people" are mii'due south (created in Mii channel) they will stay in the console. If they are created inside a game, they will stay in that game where they been created.

• Question

  How do you connect peripherals to a Wii?

  

  Peripherals such as keyboards tin be continued using the two USB ports on the back of the console. GameCube controllers can exist plugged into the ports on top of the Wii.

• Question

  What do I practise if my arrangement says it can't read the disc?

  

  Check the disk for dirt. If information technology is muddied, make clean the disk with a dry soft cloth. If the game is scratched, endeavour replacing the game. If you lot still cannot become the Wii to play the game, go to a local video game store and inquire if they tin can clean the laser lens for you. If all else fails, contact Nintendo for repairs.

• Question

  How can I keep the mitt cursor from disappearing?

  

  Brand certain your sensor bar is in an unobstructed location -- either directly in a higher place or beneath your Tv. Bespeak the Wii remote at the screen at an optimal distance (3 to 10 feet from the Television receiver).

• Question

  Why, when I try to admission the game, does it tell me to add move sensor plus to my mitt set, and why won't it let me featherbed that page in setup?

  

  Abbey Grand.

  Customs Respond

  Your game requires Wii MotionPlus, a split up accessory for older Wii Remotes. Newer remotes have this characteristic built-in. You can tell by the text on new Wii Remotes under the LEDs reading "Wii MotionPlus Within." You lot will not be able to play that game without Wii MotionPlus.

Bear witness more answers

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

Video

• Ensure the Sensor strip is in the all-time place when you lot are playing. Test it out and move it if yous think it isn't authentic plenty.

Advertising

• This system can easily break if knocked off or dropped.

• Don't accept the controller besides shut to the sensor bar! Information technology can make the cursor flicker or motion.

• Be sure that when placing the console vertically, it won't fall over. The concluding thing you want to practice with your new Wii is to have your cat knock it over! You may desire to place it on its side.

• Make sure that strap is firmly connected to the remote and securely fastened to your wrist before playing!

Advertisement

About This Article

Article Summary X

To gear up your Nintendo Wii hardware, plug in your Wii and then connect the sensor confined to your Idiot box. To do this, plug the thin, black-and-grayness sensor bar's cable into the red port that'south on the back of the Wii console. Then, place 1 sensor bar in a higher place or on your Boob tube and the other below your TV. Afterwards your sensors are connected, attach the red, white, and xanthous A/V cables to the colored ports behind or on the side of your TV. Then, turn on your Television set, find the input channel and follow the directions on the ready upwards menu. To learn how to prepare your Nintendo Wii software, scroll down!

Did this summary help you lot?

Thanks to all authors for creating a page that has been read 531,867 times.

Did this article help you?

Source: https://www.wikihow.com/Set-Up-Your-Nintendo-Wii

Share this post